Code 39 Length 1 - Datalogic MAGELLAN 9800i Product Reference Manual

Code 39 Length 1

If Code 39 Length Control is set to Fixed-Length decoding, this feature speci-
fies Code 39 first fixed length. If Code 39 Length Control is set to Variable-
Length decoding, this feature specifies the minimum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
cover any unused barcodes on this and the facing page to ensure that the
scanner reads only the barcode you intend to scan.
3. Scan the appropriate digits from the
that represent the desired label length. The selectable range for this
option is 00 to 50. Pad all single digit numbers with a leading zero to yield
a two-digit entry (00-50).
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
Product Reference Guide
Set Code 39 Length 1 on page 301
Keypad on page 403
04B2(CR)
Default setting for this feature = 02
Enter/Exit Programming Mode
below. You'll need to
in Appendix C
Set Code 39 Length 1
301