Code 39 Stitching
Enables/disables stitching for Code 39 labels. When parts of a Code 39 barcode
are presented to the scanner with this feature enabled, the barcode parts will be
assembled by the scanner's software, and the data will be decoded if all bar-
code proofing requirements are met.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the barcodes below. You'll need to cover any
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
00D101(CR)
Code 39 Stitching = Enable
Product Reference Guide
Enter/Exit Programming Mode
00D100(CR)
Code 39 Stitching = Disable
DEFAULT
303