Expand Code128 To Code 39 - Datalogic MAGELLAN 9800i Product Reference Manual

Enter/Exit Programming Mode

Expand Code128 to Code 39

Enables/disables expansion of Code 128 labels to Code 39.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
069601(CR)
Expand Code128 to Code 39 = Enable
310
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode bar code.
069600(CR)
Expand Code128 to Code 39 = Disable
Magellan™ 9800i Scanner
Code 128 Enable