Data Matrix Length 1, Length 2 Programming Instructions - Datalogic MAGELLAN 9800i Product Reference Manual

Enter/Exit Programming Mode

Data Matrix Length 1, Length 2 Programming Instructions

If Data Matrix Length Control is set to Fixed-Length decoding, this feature
specifies Data Matrix first fixed length. If Data Matrix Length Control is set to
Variable-Length decoding, this feature specifies the minimum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
Default setting for this feature = 0001
0104(CR)
Set Data Matrix Length 2
370
For Data Matrix bar codes, only the data characters are
included in the length calculations.
NOTE
Set Data Matrix Length 1 on page
Length 2 on page 370
this and the facing page to ensure that the scanner reads only the bar code
you intend to scan.
that represent the desired label length. The selectable range for this
option is 0001 to 3116. Pad all numbers with leading zeros to yield a four-
digit entry (0001-3116).
gramming Mode bar code.
below. You'll need to cover any unused barcodes on
Keypad on page 403
0103(CR)
Set Data Matrix Length 1
Default setting for this feature = 0800
Data Matrix Enable
370or Set Data Matrix
in Appendix C
Magellan™ 9800i Scanner