Micro Pdf 417 Length 1, Length 2 Programming Instructions - Datalogic MAGELLAN 9800i Product Reference Manual

Micro PDF 417 Length 1, Length 2 Programming Instructions

If Micro PDF 417 Length Control is set to Fixed-Length decoding, this feature
specifies Micro PDF 417 first fixed length. If Micro PDF 417 Length Control is
set to Variable-Length decoding, this feature specifies the minimum label
length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
PDF 417 Length 2 on page 377
barcodes on this and the facing page to ensure that the scanner reads only
the bar code you intend to scan.
3. Scan the appropriate digits from the
that represent the desired label length. The selectable range for this
option is 0001 to 0366. Pad all numbers with leading zeros to yield a four-
digit entry (0001-0366).
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
Default setting for this feature = 0001
0351(CR)
Set Micro PDF 417 Length 2
Product Reference Guide
This tag is only valid for units with a model ID that supports PDF.
Length 1 is the minimum label length if in variable length mode,
or the first fixed length if in fixed length mode. Length 2 is the
NOTE
maximum label length if in variable length mode, or the second
fixed length if in fixed length mode. Length includes the bar-
code' s data characters only. Any value > 0366 will be considered
to be 0366.
Set Micro PDF 417 Length 1 on page 377
Enter/Exit Programming Mode
below. You'll need to cover any unused
Keypad on page 403
0350(CR)
Set Micro PDF 417 Length 1
Default setting for this feature = 0366
or Set Micro
in Appendix C
377