Datalogic MAGELLAN 9800i Product Reference Manual page 83

Figure 40. Problem Isolation: Remote Display
Product Reference Guide
REMOTE DISPLAY
START
Is the
Use the programming bar
NO
unit configured
codes in the Programming
for a Remote
Section to enable operation
Display
using a Remote Display.
?
YES
Verify that the Remote
Display cable is securely
NO
attached to the external
Remote Display port and
reset the scanner.
Re-connect using a
Is the
NO
known-good Remote
problem
Display. Reset the
fixed
scanner and retest.
?
YES
DONE
Scanner-scale models that include
a Remote Display when shipped
from the factory, are configured
for use with the display. If you're
unsure of the settings for your
unit, contact Tech Support.
Is the
YES
problem
fixed
?
NO
Call Tech Support
Flowcharts
DONE
Is the
YES
Replace the
problem
Remote Display
fixed
?
73