Micro Qr Code Length 1, Length 2 Programming Instructions - Datalogic MAGELLAN 9800i Product Reference Manual

Enter/Exit Programming Mode

Micro QR Code Length 1, Length 2 Programming Instructions

If Micro QR Code Length Control is set to Fixed-Length decoding, this feature
specifies Micro QR Code first fixed length. If Micro QR Code Length Control is
set to Variable-Length decoding, this feature specifies the minimum label
length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
Default setting for this feature = 0001
042C(CR)
Set Micro QR Code Length 2
384
Length 1 is the minimum label length if in variable
length mode, or the first fixed length if in fixed length
mode. Length 2 is the maximum label length if in vari-
able length mode, or the second fixed length if in fixed
NOTE
length mode. Length includes the barcode's data charac-
ters only. Any value > 3700 will be considered to be
3700.
Set Aztec Length 1 on page 387
Length 2 on page 384
this and the facing page to ensure that the scanner reads only the bar code
you intend to scan.
that represent the desired label length. The selectable range for this
option is 0001 to 3700. Pad all numbers with leading zeros to yield a four-
digit entry (0001-3700).
gramming Mode bar code.
below. You'll need to cover any unused barcodes on
Keypad on page 403
042B(CR)
Set Micro QR Code Length 1
Default setting for this feature = 3700
Micro QR Code Enable
or Set Micro QR Code
in Appendix C
Magellan™ 9800i Scanner