Databar Omnidirectional/Ean-128 Emulation - Datalogic MAGELLAN 9800i Product Reference Manual

DataBar Omnidirectional/EAN-128 Emulation

Enables/disables the ability of DataBar Omnidirectional to be transmitted as
EAN-128.
1. To set this feature:
2. Scan the ENTER/EXIT Programming Mode bar code.
3. Scan either the enable or disable barcode below. You'll need to cover any
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
04D401(CR)
DataBar Omnidirectional/EAN-128 Emulation = Enable
Product Reference Guide
Enter/Exit Programming Mode
04D400(CR)
DataBar Omnidirectional/EAN-128 Emulation = Disable
283