Msi Number Of Check Characters - Datalogic MAGELLAN 9800i Product Reference Manual

MSI Number of Check Characters

Specifies number of MSI check characters to be calculated and verified.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode below representing the desired number of MSI check
characters to be calculated and verified. You'll need to cover any unused
barcodes on this and the facing page to ensure that the scanner reads only
the barcode you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
021701(CR)
MSI Number of Check Characters = 2
Product Reference Guide
Check characters are always modulus 10.
NOTE
Enter/Exit Programming Mode
021700(CR)
MSI Number of Check Characters = 1
349