I 2 Of 5 Stitching - Datalogic MAGELLAN 9800i Product Reference Manual

Enter/Exit Programming Mode

I 2 of 5 Stitching

Enables/disables stitching for I 2 of 5 labels. When parts of an I 2 of 5 barcode
are presented to the scanner with this feature enabled, the barcode parts will be
assembled by the scanner's software, and the data will be decoded if all bar-
code proofing requirements are met.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the barcodes below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
06AF01(CR)
I 2 of 5 Stitching = Enable
326
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode bar code.
Interleaved 2 of 5 (I 2 OF 5) Enable
06AF00(CR)
I 2 of 5 Stitching = Disable
Magellan™ 9800i Scanner