Qr Code Length 1, Length 2 Programming Instructions - Datalogic MAGELLAN 9800i Product Reference Manual

QR Code Length 1, Length 2 Programming Instructions

If QR Code Length Control is set to Fixed-Length decoding, this feature speci-
fies QR Code first fixed length. If QR Code Length Control is set to Variable-
Length decoding, this feature specifies the minimum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
Length 2 on page 381
this and the facing page to ensure that the scanner reads only the bar code
you intend to scan.
3. Scan the appropriate digits from the
that represent the desired label length. The selectable range for this
option is 0001 to 2710. Pad all numbers with leading zeros to yield a four-
digit entry (001-02710).
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
Default setting for this feature = 0001
03DB(CR)
Set QR Code Length 2
Product Reference Guide
Length 1 is the minimum label length if in variable
length mode, or the first fixed length if in fixed length
mode. Length 2 is the maximum label length if in vari-
able length mode, or the second fixed length if in fixed
NOTE
length mode. Length includes the barcode's data char-
acters only. Any value > 2710 will be considered to be
2710.
Set QR Code Length 1 on page 381
below. You'll need to cover any unused barcodes on
Enter/Exit Programming Mode
Keypad on page 403
03DA(CR)
Set QR Code Length 1
Default setting for this feature = 2710
or Set QR Code
in Appendix C
381