Standard 2 Of 5 Length 1 - Datalogic MAGELLAN 9800i Product Reference Manual

Standard 2 of 5 Length 1

If Standard 2 of 5 Length Control is set to Fixed-Length decoding, this feature
specifies Standard 2 of 5 first fixed length. If Standard 2of 5 Length Control is
set to Variable-Length decoding, this feature specifies the minimum label
length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
need to cover any unused barcodes on this and the facing page to ensure
that the scanner reads only the barcode you intend to scan.
3. Scan the appropriate digits from the
that represent the desired label length. The selectable range for this
option is 1 to 50. Pad all single digit numbers with a leading zero to yield a
two-digit entry (01-50).
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
Product Reference Guide
Set Standard 2 of 5 Length 1 on page 363
Keypad on page 403
0498(CR)
Default setting for this feature = 08
Enter/Exit Programming Mode
below. You'll
in Appendix C
Set Standard 2 of 5 Length 1
363