Datalogic MAGELLAN 9800i Product Reference Manual page 43

7" or 12"
4. [For 9" TDR ONLY]- slide the provided long bolts through both the TDR
and the Riser.
5. Use a 3mm ball end hex driver to
vided for this
6. Fully seat the plastic Corner Piece in the grooves intended for it on the
scanner frame.
Product Reference Guide
TDR
TDR
Corner Piece
TDR Cable
purpose, tightening them evenly to 1.74Nm (15 in-lb).
TDR
Bolts
TDR Cable
secure the TDR with the two bolts pro-
SECTION III. Installation
9" TDR
Bolts
Corner Piece
Riser
33