Standard 2 Of 5 Length 2 - Datalogic MAGELLAN 9800i Product Reference Manual

Enter/Exit Programming Mode

Standard 2 of 5 Length 2

If Standard 2 of 5 Length Control is set to Fixed-Length decoding, this feature
specifies Standard 2 of 5 second fixed length. If Standard 2of 5 Length Control
is set to Variable-Length decoding, this feature specifies the maximum label
length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
364
When in Fixed Length mode, if Length 2 is set to the value
of 00 (zero), then only Length 1 will apply.
NOTE
Set Standard 2 of 5 Length 2 on page 364
need to cover any unused barcodes on this and the facing page to ensure
that the scanner reads only the barcode you intend to scan.
that represent the desired label length. The selectable range for this
option is 1 to 50. Pad all single digit numbers with a leading zero to yield a
two-digit entry (01-50).
gramming Mode bar code.
Standard 2 of 5 Enable
Keypad on page 403
0499(CR)
Set Standard 2 of 5 Length 2
Default setting for this feature = 50
Magellan™ 9800i Scanner
below. You'll
in Appendix C