Microsd Card Removal - Datalogic MAGELLAN 9800i Product Reference Manual

4. Carefully insert the microSD card into the slot until it "clicks" into place.
CAUTION
Figure 51. Inserting the microSD Card
5. If installed properly, you should immediately hear an audible signal upon
insertion or removal of a microSD card. Various operations will also be
indicated by the scanner's good read LED.

microSD Card Removal

Push in gently using your finger or thumbnail to disengage and remove the
microSD card. Remember to keep your finger in place atop the card's edge to
avoid accidentally "launching" the card from the spring-loaded slot.
406
The microSD card slot is spring-loaded. Keep your finger lightly in
place atop the card until you are sure it is fully seated in place. See Fig-
ure 51
Use your finger or thumbnail to push in on the top edge of the card to
be slightly below flush with the scanner enclosure when inserting or
removing the card. This will engage/disengage the spring mechanism.
Never insert tools or other foreign objects into the microSD card slot.
microSD
Scanner
Push down
Seated card
past flush to
seat, then car-
Magellan™ 9800i Scanner