Datalogic MAGELLAN 9800i Product Reference Manual page 30

Site Preparation and Installation
Vertical Clearance
A minimum vertical clearance of 3.8 cm (1.5") MUST be provided (reference
ure 7). This will facilitate ease of scanning, and allow adequate space above the
scanner bonnet for removal and replacement of the All Weighs™ Platter (the L-
shaped platter).
Figure 7. Vertical Clearance
(Keyboard Mount)
Display Clearance
Clearance must be allowed so that a POS display will not interfere with the
scanner's read zones. Adjustment must be made depending upon whether or
not there is a Top Down Reader (TDR) installed.
NO TDR
With TDR
20
— POS display placement for scanners not having a TDR must not
encroach the scan zone formed by the horizontal and vertical windows.
The bottom of the display must be no lower than the 30° line shown in ,
which projects from the front edge of the bonnet, 6 cm above the weigh
platter.
— If a POS display is to be installed above the scanner in conjunction
with an installed TDR (long or short model), the face of the display can be
no closer than 2 cm (.79") behind the line shown below, which represents
the frontmost edges of the scanner's bonnet.
DO NOT
Obstruct
L-Platter
Removal
Allow a minimum
clearance of
3.8cm (1.5")
(Enclosure)
Fig-
DO NOT
Obstruct
Scan Zone
Magellan™ 9800i Scanner