QR Code Enable
Enables/disables the ability of the scanner to decode QRCode labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
03D701(CR)
QR Code = Enable
Product Reference Guide
Enter/Exit Programming Mode
03D700(CR)
QR Code = Disable
379