Pdf 417 Length 1, Length 2 Programming Instructions - Datalogic MAGELLAN 9800i Product Reference Manual

PDF 417 Length 1, Length 2 Programming Instructions

If PDF417 Length Control is set to Fixed-Length decoding, this feature specifies
PDF417 first fixed length. If PDF417 Length Control is set to Variable-Length
decoding, this feature specifies the minimum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
Length 2 on page 373
this and the facing page to ensure that the scanner reads only the bar code
you intend to scan.
3. Scan the appropriate digits from the
that represent the desired label length. The selectable range for this
option is 0001 to 2710. Pad all numbers with leading zeros to yield a four-
digit entry (0001-2710).
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
Default setting for this feature = 0001
05A7(CR)
Set PDF 417 Length 2
Product Reference Guide
This tag is only valid for units with a model id that sup-
ports PDF.
Length 1 is the minimum label length if in variable
NOTE
length mode, or the first fixed length if in fixed length
mode. Length 2 is the maximum label length if in vari-
able length mode, or the second fixed length if in fixed
length mode. Length includes the barcode's data char-
acters only. Any value > 2710 will be considered to be
2710.
Set PDF 417 Length 1 on page 373
below. You'll need to cover any unused barcodes on
Enter/Exit Programming Mode
Keypad on page 403
05A6(CR)
Set PDF 417 Length 1
Default setting for this feature = 2710
or Set PDF 417
in Appendix C
373