Ean Two Label Minimum Read - Datalogic MAGELLAN 9800i Product Reference Manual

EAN Two Label Minimum Read

This feature specifies the minimum number of consecutive EAN Two Label
decodes before is accepted as good read.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
008602(CR)
EAN Two Label Minimum Read = 2
008604(CR)
EAN Two Label Minimum Read = 4
Product Reference Guide
Enter/Exit Programming Mode
008601(CR)
EAN Two Label Minimum Read = 1
008603(CR)
EAN Two Label Minimum Read = 3
273