Enter/Exit Programming Mode
Codabar Start Stop Character Match
Enables/disables the requirement that start and stop characters match.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
023201(CR)
Codabar Start Stop Character Match = Enable
330
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode bar code.
023200(CR)
Codabar Start Stop Character Match = Disable
Magellan™ 9800i Scanner
Codabar Enable