Host Commands; Accepting Commands From An Rs-232 Scanner Host - Datalogic MAGELLAN 9800i Product Reference Manual

Accepting Commands from an RS-232 Scanner Host

The scanner responds to the following RS-232 commands:
COMMAND
Enable Scanner
Disable Scanner
Reset Scanner
Not On File Indication
Beep Good Read Tone
Force Good Read
Tone
Bel
Identification request
Health request
Status request
a. Call Tech Support for information.
If one of the above commands is received, the scanner will perform the steps
indicated for the command. Host commands for other interfaces is also avail-
able. Contact Tech Support for more details.
Product Reference Guide
ASCII HEX COMMENT
E 0x45
D 0x44
R 0x52
F 0x46
B 0x42
0x01
0x07
i 0x69
h 0x68
s 0x73
Appendix E

Host Commands

Long series of beeps
Beeps if Good Read Beep is enabled
Beeps regardless of beep setting
Force Good Read Tone
Returns long response
Returns long responsea
Returns long responsea
a
411