Datalogic MAGELLAN 9800i Product Reference Manual page 51

customdata
u
If the diagnostics routine is not completed successfully, the scanner will sound
a series of tones and the Health & Status indicator will show an error code. Turn
to Chapter 5, Problem Isolation
Press the Scale Zero Button once more to reset the unit and exit Scale Diagnos-
tic Mode. See the topic,
more information about unit resets.
Optional Remote Display Scale Diagnostics Indications
If your unit is equipped with an optional Remote Display, it will show the fol-
lowing sequence, with each character being separated by 500ms or greater
blank time on the display (for ease of reading). This display continues to scroll
across the display for a set number of times.
CHARACTERS EXPLANATION OF INDICATION
PASS or ERRx Where x is 1 through 5.
Product Reference Guide
Is the value of a custom data string (if present — no data may
be displayed if the item value is not set.
The sequence will be repeated
Upon successful completion, the scanner will automatically
8
reset, displaying an 8.
Scanner and Scale Reset on page 55
All segments on the display are illuminated.
Where x indicates the number of scale zeroing attempts.
x
Where xx represents the number of calibrations, with a maxi-
c x
mum of 999 displayed.
— x Where x indicates the scale gravity zone.
Where xxxx is the load cell software checksum in hex lower 4
xxxx
characters.
for a description of error codes.
SECTION III. Installation
in Chapter 3 for
41