Code 128 Length 1 - Datalogic MAGELLAN 9800i Product Reference Manual

Enter/Exit Programming Mode

Code 128 Length 1

If Code 128 Length Control is set to Fixed-Length decoding, this feature speci-
fies Code 128 first fixed length. If Code 128 Length Control is set to Variable-
Length decoding, this feature specifies the minmum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
314
Set Code 128 Length 1 on page 314
to cover any unused barcodes on this and the facing page to ensure that
the scanner reads only the barcode you intend to scan.
that represent the desired label length. The selectable range for this
option is 01 to 80. Pad all single digit numbers with a leading zero to yield
a two-digit entry (01-80).
gramming Mode bar code.
Keypad on page 403
04B8(CR)
Set Code 128 Length 1
Default setting for this feature = 01
Magellan™ 9800i Scanner
Code 128 Enable
below. You'll need
in Appendix C