Databar Expanded Length 2 - Datalogic MAGELLAN 9800i Product Reference Manual

Enter/Exit Programming Mode

DataBar Expanded Length 2

Length 2 is the maximum label length if in variable length mode, or the second
fixed length if in fixed length mode. Length includes the barcode's data char-
acters only.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
292
When in Fixed Length mode, if Length 2 is set to the value
of 00 (zero), then only Length 1 will apply.
NOTE
Set DataBar Expanded Length 2 on page 292
You'll need to cover any unused barcodes on this and the facing page to
ensure that the scanner reads only the barcode you intend to scan.
that represent the desired label length. The selectable range for this
option is 00 to 74. Pad all single digit numbers with a leading zero to yield
a two-digit entry (00-74).
gramming Mode bar code.
DataBar Expanded Enable
Keypad on page 403
04BF(CR)
Set DataBar Expanded Length 2
Default setting for this feature = 74
Magellan™ 9800i Scanner
below.
in Appendix C