In-Store Printed Label Minimum Read - Datalogic MAGELLAN 9800i Product Reference Manual

Enter/Exit Programming Mode

In-Store Printed Label Minimum Read

This feature specifies the minimum number of consecutive In-Store Printed
Label decodes before is accepted as good read.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
008502(CR)

In-Store Printed Label Minimum Read = 2

008504(CR)
In-Store Printed Label Minimum Read = 4
262
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Other UPC/EAN Options
008501(CR)
In-Store Printed Label Minimum Read = 1
008503(CR)
In-Store Printed Label Minimum Read = 3
Magellan™ 9800i Scanner