Standard 2 of 5 Stitching
Enables/disables stitching for Standard 2 of 5 labels. When parts of a Standard
2 of 5 barcode are presented to the scanner with this feature enabled, the bar-
code parts will be assembled by the scanner's software, and the data will be
decoded if all barcode proofing requirements are met.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the barcodes below. You'll need to cover any
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
059201(CR)
Standard 2 of 5 Stitching = Enable
Product Reference Guide
This applies when Standard 2 of 5 Length Control on
page 362 is set to fixed-length decoding.
NOTE
Enter/Exit Programming Mode
059200(CR)
Standard 2 of 5 Stitching = Disable
365