Code 32 Check Character Transmission - Datalogic MAGELLAN 9800i Product Reference Manual

Code 32 Check Character Transmission

Enables/disables transmission of Code 32 check character.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
00EF01(CR)
Code 32 Check Character Transmission = Enable
Product Reference Guide
This item is ignored when the advanced feature, Full Label
Edit, is enabled.
NOTE
Enter/Exit Programming Mode
00EF00(CR)
Code 32 Check Character Transmission = Disable
307