Enter/Exit Programming Mode
UPC/EAN Stitch Exact Label Halves
This setting enables the stitching of exact UPC-A/EAN-13 label halves with no
overlapping characters.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
054101(CR)
UPC/EAN Stitch Exact Label Halves = Enable
266
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Other UPC/EAN Options
054100(CR)
UPC/EAN Stitch Exact Label Halves = Disable
Magellan™ 9800i Scanner