Microsd Function Details; From Scanner To Microsd Card - Datalogic MAGELLAN 9800i Product Reference Manual

microSD Function Details

From Scanner to microSD Card

Capture and save an image to a microSD card by scanning a label.
1. Insert the microSD card into the scanner
2. Scan the Capture Label
The scanner enters image capture mode.
3. Present the item to be captured to the scanner.
Press and release the Camera Button. The scanner will automatically cap-
ture and save the image to the microSD card.
4. Upon scanner audio indication of completion, an image is saved to the
microSD card.
NOTE
Export a Configuration file from the Scanner to the microSD card
By AUTORUN.DLS file
1. Generate a text file by any text editor as follows and save it as AUTO-
RUN.DLS.
$START$
DUMPCFG,SDCONFIG.TEX (Filename can be anything, for example "SOME-
THING.TEX")
$END$
2. Save or copy file AUTORUN.DLS to microSD card.
3. Insert the microSD card to scanner.
4. Wait for 3 seconds,
A scanner configuration file named SDCONFIG.TXT is saved to the microSD
card.
408
The image file name range is from IMAGE000 to IMAGE999. if the
same name already exists in the microSD card, the scanner skips that
name and uses the next. For example, if IMAGE000.JPG is already used
in the microSD card, the scanner uses IMAGE001.JPG. The time stamp
is not real, since scanner does not have a real time clock.
Image format (.BMP, .JPG), image size (VGA, WVGA, Full size), Bright-
ness (0~9), contrast (0~9), and JPG compression ratio (0~100) are
defined in configuration.
Magellan™ 9800i Scanner