Calibration Switch - Datalogic MAGELLAN 9800i Product Reference Manual

Calibration Switch

This switch initiates the scale's calibration routine. A certified weight set is
needed to perform the scale calibration steps detailed in
Procedures. This switch is not included in scanners without scale modules.
Calibration Switch Seal
This seal allows you to secure the Calibration Switch access cover and restrict
access to the Calibration Switch. If the calibration seal is broken or missing, you
may be prohibited from operating the scale without recertification. Check local
and state requirements for specific restrictions.
Calibration Switch Cover
This cover restricts access to the Calibration Switch to help guard against unau-
thorized tampering when sealed. See Figure 42 on page 79 for more informa-
tion.
LEGAL NOTE
398
There are regulations that must be followed in order to
ensure compliance when operating a weighing device
such as the scanner/scale. Failure to observe and comply
with these regulations could result in legal action.
This function may not apply to Adaptive Scale models.
NOTE
Chapter 6, Calibration
Magellan™ 9800i Scanner