Datalogic MAGELLAN 9800i Product Reference Manual page 69

Figure 30. Vertical Scan Window Removal/Replacement
1
1
2
4. Carefully align the new vertical scan window its window frame. Push in and
upwards to seat the window in the frame and secure it in place.
5. Reinstall the wedge-shaped plastic piece, pushing down gently but firmly
over the entire surface to engage all six snaps and three detents along
each side where the plastic and stainless steel bezel are joined.
6. Clean both sides of the Vertical Scan Window using a paper towel or lint
free cleaning tissues dampened with a mild, water-based glass cleaner.
DO NOT use abrasive cleaners or pads.
7. Reinstall the platter. Vertical Scan Window replacement is now complete.
Product Reference Guide
Push in to release 6 tabs
Lift off the wedge-shaped plastic piece
2
3
3 Press window(s) in or out of the frame
4 Carefully dispose of the damaged glass
Operational Maintenance
4
59