I 2 of 5 Length Control
This feature specifies whether variable-length or fixed-length decoding will be
set for I 2 of 5.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the barcodes below. You'll need to cover any
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
022B01(CR)
I 2 of 5 Length Control = Fixed Length
Product Reference Guide
Enter/Exit Programming Mode
022B00(CR)
I 2 of 5 Length Control = Variable Length
323