Qr Code Length Control - Datalogic MAGELLAN 9800i Product Reference Manual

Enter/Exit Programming Mode

QR Code Length Control

Fixed Length Decoding —
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding —
ner will decode a ar code if the label length falls in the range of the configurable
minimum and maximum length.
Configuring Fixed Length Decoding:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the Fixed Length Decoding bar code.
3. Scan the ENTER/EXIT Programming Mode bar code.
4. Set Length 1 to the first fixed length using the
5. Set Length 2 to the second fixed length (or to '0000' if there is only one
Configuring Variable Length Decoding:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the Variable Length Decoding bar code.
3. Scan the ENTER/EXIT Programming Mode bar code.
4. Set Length 1 to the minimum length using the
5. Set Length 2 to the maximum length using the
DEFAULT
03D901(CR)
QR Code Length Control = Fixed Length
380
When fixed length decoding is enabled, the scanner
Programming Instructions on page 381
fixed length) using the
tions on page 381.
Programming Instructions on page 381
2 Programming Instructions on page
When variable length decoding is enabled, the scan-
that follow this page.
QR Code Length 1, Length 2 Programming Instruc-
that follow this page.
381.
03D900(CR)
QR Code Length Control = Variable Length
QR Code Enable
QR Code Length 1, Length 2
QR Code Length 1, Length 2
QR Code Length 1, Length
Magellan™ 9800i Scanner