Enter/Exit Programming Mode
Code 128 Stitching
Enables/disables stitching for Code 128 labels. When parts of a Code 128 bar-
code are presented to the scanner with this feature enabled, the barcode parts
will be assembled by the scanner's software, and the data will be decoded if all
barcode proofing requirements are met.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the barcodes below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
06A801(CR)
Code 128 Stitching = Enable
316
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode bar code.
06A800(CR)
Code 128 Stitching = Disable
DEFAULT
Magellan™ 9800i Scanner
Code 128 Enable