Enter/Exit Programming Mode
Micro QR Code Enable
Enables/disables the ability of the scanner to decode Micro QRCode labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
042801(CR)
Micro QR Code = Enable
382
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Micro QR Code Enable
042800(CR)
Micro QR Code = Disable
Magellan™ 9800i Scanner