Code 39 Check Character Calculation
Enables/disables calculation and verification of an optional Code 39 check
character. When disabled, any check character in label is treated as a data char-
acter.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
005501(CR)
Code 39 Check Character Calculation = Enable
Product Reference Guide
If check calculation is disabled, the risk is increased that a
misread can occur.
NOTE
Enter/Exit Programming Mode
005500(CR)
Code 39 Check Character Calculation = Disable
295