Aztec Length Control - Datalogic MAGELLAN 9800i Product Reference Manual

Enter/Exit Programming Mode

Aztec Length Control

Fixed Length Decoding —
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding —
ner will decode a ar code if the label length falls in the range of the configurable
minimum and maximum length.
Configuring Fixed Length Decoding:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the Fixed Length Decoding bar code.
3. Scan the ENTER/EXIT Programming Mode bar code.
4. Set Length 1 to the first fixed length using the
5. Set Length 2 to the second fixed length (or to '0000' if there is only one
Configuring Variable Length Decoding:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the Variable Length Decoding bar code.
3. Scan the ENTER/EXIT Programming Mode bar code.
4. Set Length 1 to the minimum length using the
5. Set Length 2 to the maximum length using the
DEFAULT
043201(CR)
Aztec Length Control = Fixed Length
386
When fixed length decoding is enabled, the scanner
Programming Instructions on page 387
fixed length) using the
tions on page 387.
Programming Instructions on page 387
Programming Instructions on page
When variable length decoding is enabled, the scan-
that follow this page.
Aztec Length 1, Length 2 Programming Instruc-
that follow this page.
387.
043200(CR)
Aztec Length Control = Variable Length
Aztec Enable
Aztec Length 1, Length 2
Aztec Length 1, Length 2
Aztec Length 1, Length 2
Magellan™ 9800i Scanner