Enter/Exit Programming Mode
Code 39 Length Control
This feature specifies whether variable-length or fixed-length decoding will be
set for Code 39.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the barcodes below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
04B101(CR)
Code 39 Length Control = Fixed Length
300
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode bar code.
04B100(CR)
Code 39 Length Control = Variable Length
Magellan™ 9800i Scanner
Code 39 Enable