Code 39 Enable - Datalogic MAGELLAN 9800i Product Reference Manual

Code 39 Enable

Enables/disables the ability of the scanner to decode Code 39 labels.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
008E01(CR)
Code 39 = Enable
Product Reference Guide
Enter/Exit Programming Mode
008E00(CR)
Code 39 = Disable
DEFAULT
293