Code 93 Stitching - Datalogic MAGELLAN 9800i Product Reference Manual

Hide thumbs Also See for MAGELLAN 9800i:

Table of Contents

Enter/Exit Programming Mode

Code 93 Stitching

Enables/disables stitching for Code 93 labels. When parts of a Code 93 barcode

are presented to the scanner with this feature enabled, the barcode parts will be

assembled by the scanner's software, and the data will be decoded if all bar-

code proofing requirements are met.

To set this feature:

1. Scan the ENTER/EXIT Programming Mode bar code.

2. Scan your selection from the barcodes below. You'll need to cover any

3. Complete the programming sequence by scanning the ENTER/EXIT Pro-

Code 93 Stitching = Enable

unused barcodes on this and the facing page to ensure that the scanner

reads only the barcode you intend to scan.

gramming Mode bar code.

Code 93 Stitching = Disable

Magellan™ 9800i Scanner

Code 93 Enable

Show Quick Links

Table of Contents