Led And Audio Indications - Datalogic MAGELLAN 9800i Product Reference Manual

LED and Audio Indications

Since audio indications are configurable, your unit may
not be programmed to sound all the indications as listed.
For more information, see the Programming section of
this manual.
NOTE
Scanner and Scale LEDs
The Green Good Read indicator bars
and the Scale LED
LED
INDICATION
Scale at Zero
Scanner Active
(Normal Mode)
Good Read
Indication
Program Mode
Indication
Sleep Mode Indica-
tion
Scanner Disabled
Field Replaceable
Unit (FRU) Warning
(Error Mode)
FRU Indication
ROM Failure
a. Certain functions of the Green and Yellow LEDs are selectable to be enabled or disabled. Your
scanner may not be programmed to display all indications.
b. For FRU error 9, the Deactivator LED (tri-color) is off.
Product Reference Guide
(Figure 49) is primarily used to show scale status.
DURATION
Scale (Yellow) LED on steady
a
a
Scanner (Green) LED on steady and dim
Scanner (Green) LED - bright flash
a
Scanner (Green) LED - Continuous flash-
ing
Scanner (Green) LED flashes slowly 10ms
on, 1990ms off.
Scanner (Green) LED blinks100ms on,
a
900ms off.
Audible low tone 1 second.
Alternating Scanner/Scale /EAS and
ScaleSentry LEDs flash continuously
Scanner (Green) LED flashes a coded
sequence in concert with the speaker.
Scanner (Green) LED - Continuous flash-
ing 200ms on, 200ms off.
Controls and Indicators
(Figure 48Figure 48) show scanner status,
COMMENT
The scale is at rest and reads zero
weight. The scale is ready to weigh.
The scanner is ready for operation.
Scanning is immediately available.
Indicates a bar code has been read and
decoded.
Indicates the scanner is in Label Pro-
gramming Mode. Cycle power (or read
an Exit Programming label) to exit Pro-
gramming Mode.
The scanner has automatically
switched off and the unit has entered
Sleep Mode due to extended inactivity.
Host has disabled scanning.
Serves notice that a fatal FRU failure
has been detected. Consult in this
b
.
manual for more details.
Occurs ONLY upon Volume/Tone but-
ton push following a FRU warning.
Enables service technicians to identify
FRU failures.
Indicates Boot ROM failure or Program
ROM failure.
391