From Microsd Card To Scanner - Datalogic MAGELLAN 9800i Product Reference Manual

From microSD Card to Scanner

Application code load to scanner
By AUTORUN.DLS file
1. Generate a text file by any text editor as follows and save it as AUTO-
RUN.DLS
$START$
LOADSW,R96-APP1.BIN
$END$
2. Step 2: Save or copy file AUTORUN.DLS to microSD card and copy the
application code (example R96-APP1.BIN) to the microSD card.
3. Insert the microSD card into the scanner.
4. Upon scanner audio indication of completion, the application code R96-
APP1.BIN is loaded to the scanner. Typically, this takes about 45 seconds.
Configuration load to scanner
By Autorun file
1. Generate a text file by any text editor as follows and save it as AUTO-
RUN.DLS
$START$
CONFIG,R96-CFG1.TEX
$END$
2. Save or copy the autorun.dls file, and copy the CPLD code (example R96-
CFG1.TEX) to the microSD card
3. Insert the microSD card into to the scanner
4. Upon scanner audio indication of completion, configuration R96-
CFG1.TEX is loaded to the scanner.
410 Magellan™ 9800i Scanner