Controls And Indicators - Datalogic MAGELLAN 9800i Product Reference Manual

Hide thumbs Also See for MAGELLAN 9800i:
Table of Contents

Advertisement

Controls and Indicators

Two panels on either side of the vertical scan windows contain control buttons
and more LED indicators. Additionally, a configurable speaker is used to sound
scanning, weighing and EAS deactivation indications.
Figure 49. Control Buttons and Indicator LEDs
Manual EAS Deactivation Button
ScaleSentry / Scale Service Button
1
Scale Zero Button
With all weight removed from the scale, push
this button to set the scale to zero.
2
Manual EAS Deactivation Button
When in EAS Manual Deactivation Mode,
push this button to deactivate an item.
3
ScaleSentry / Scale Service Button
Performs ScaleSentry and Scale Service func-
tions depending on the duration of the but-
ton press. See the topic
Scale Service Button on page
this section for more information.
4
Scale Indicator LED (Yellow)
This LED indicates scale functions. See the
Indicator Table for more information.
5
EAS Indicator LED (Red/Green/Orange)
This LED indicates EAS functions with red,
green OR orange color. See the Indicator
Table for more information.
a. Some audible indications are configurable to be on or off, as well as offer their own programmable
options for pitch, volume, etc.
390
Scale Zero Button
ScaleSentry Indicator LED (Red)
ScaleSentry /
394, in
Scale Indicator LED (Yellow)
EAS Indicator LED (Red/Green/Orange)
Speaker
6
ScaleSentry Indicator LED (Red)
This LED indicates the current ScaleSentry condition.
7
Speaker
a
Sounds
beeps, error tones and other audible signals to
indicate good read, ScaleSentry alert, system error and
other conditions.
8
Scanner Control Button
Scanner Control Button on page
See the topic
396, in this section for more information.
9
Camera Button
Press this button to place the scanner in Camera Mode
and to take pictures with the configured imager {either
the Top Down Reader [TDR] or the Mobile Commerce
Reader).
10
Mobile Commerce Button
Press this button to place the scanner in Mobile Com-
merce state. Bar code(s) can be read by the Mobile Com-
merce Reader while in this state.
Scanner Control Button
Camera Button
Mobile Commerce Button
Magellan™ 9800i Scanner

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents