Enter/Exit Programming Mode
GS1 DataBar
The symbology family, GS1 DataBar
Symbology (RSS). For the purpose of simplicity, GS1 DataBar variants are listed
in this manual as "DataBar."
DataBar Omnidirectional Enable
Enables/disables the ability of the scanner to decode DataBar Omnidirectional
labels.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
04D001(CR)
DataBar Omnidirectional = Enable
282
This value-added feature is a factory-programmed option.
Contact your dealer for information about upgrading your
system to include this advanced capability.
NOTE
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
, was formerly known as Reduced Space
TM
04D000(CR)
DataBar Omnidirectional = Disable
Magellan™ 9800i Scanner
GS1 DataBar