Enter/Exit Programming Mode
DataBar Expanded Enable
Enables/disables the ability of the scanner to decode DataBar Expanded labels.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
04D101(CR)
DataBar Expanded = Enable
286
This value-added feature is a factory-programmed option.
Contact your dealer for information about upgrading your
system to include this advanced capability.
NOTE
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode bar code.
DataBar Expanded Enable
04D100(CR)
DataBar Expanded = Disable
Magellan™ 9800i Scanner