Datalogic MAGELLAN 9800i Product Reference Manual page 403

Deactivator LED
The tri-color Deactivator LED (see
tus. The table also provides information about special beeper indications which
can be sounded in response to changes in deactivation status.
EAS DEACTIVATION DISABLED
INDICATION LED DURATION
Deactivation
Deactivation (Tri-color) LED is OFF
Disabled
Deactivation (Tri-color) LED is lit
Deactivation
steadily Green.
Ready
Deactivation (Tri-color) LED
EAS tag
flashes Red.
Detected
Deactivation (Tri-color) LED
Power-up
blinks ON/OFF Red.
Initialization
Deactivation (Tri-color) LED
flashes Red while FRU Status LED
EAS Error
flashes error code nine (9).
Deactivation (Tri-color) LED
flashes Red, then Orange, then
Deactivation
returns to Green.
Indicated
Manual Deac-
Deactivation (Tri-color) LED is lit
tivation in
steadily Green.
Progress
Deactivation (Tri-color) LED
Manual
flashes Red, then Orange, then
Deactivation
returns to Green.
Successful
Product Reference Guide
EAS BEEPER
OFF
ALL MODES (COUPLED, DECOUPLED, HYBRID or HOST)
OFF
OFF
a
OFF
Low frequency beep (1
second)
COUPLED MODE ONLY
Good read beep follows
deactivation.
Ticking sound (for config-
urable duration)
High frequency beep
Controls and Indicators
Figure 49) designates EAS deactivation sta-
COMMENT
Deactivation mode must be
selected via programming. Ref-
erence
Deactivation is ready.
An EAS tag has been sensed in
the scan volume.
System is attempting to initial-
ize EAS
EAS system is not on line.
The EAS antenna has been trig-
gered ON to deactivate a label
following successful bar code
read.
The Manual EAS Deactivation
Push Button was pressed &
released
An EAS tag was successfully
deactivated via manual push
button.
EAS Mode.
b
.
393