Radwin 5000 HPMP User Manual page 97

Configuring the Sector out of the Box - IP Addresses
Observe that the right hand spin-wheel
left Other enabled, you could have chosen a frequency by working through those
available in 5MHz increments.
9. Choose the required Channel Bandwidth:
If your hardware supports 200 Mbps net aggregate capacity, you should
chose 40 MHz Channel Bandwidth to enable it.
Note
10. To use ACS, check the Automatic Channel Selection box:
RADWIN 5000 HPMP User Manual Release 3.3.30
right hand selector wheel
is no longer displayed. Had you
Chapter 5
5-13