Radwin 5000 HPMP User Manual page 119

Creating Nomadic Entries for a Sector from a HBS Template

To create a sector from a HBS IP list and a Nomadic settings file:
1. In the window of
<IP address> <Read-Write community>
For example,
192.168.10.200 netman
All of the HBSs need to activated and accessible (via a switch) to the managing com-
puter. They need not be on the same sub-net.
Alternatively, enter them one by one using the Plus button.
Any unactivated HBSs will be shown as unavailable:
2. Make any further changes to the displayed list using the Plus/Minus buttons.
3. Click Start to commence the process.
4. The list window will indicate the success or otherwise of the upload for each HBS.
RADWIN 5000 HPMP User Manual
Figure 5-11, enter a HBS list file. The format of the file is lines of
Release 3.3.30
Chapter 5
5-35