Updating Hsu Services; Suspending An Hsu - Radwin 5000 HPMP User Manual

Updating HSU Services

Notice that 10.103 has replaced 10.101 inheriting most of its settings. It may not
inherit the Tx and Antenna settings, which you should check.
The IP address of the replacement unit is not changed. To ensure that all
10.101 traffic actually gets to the new unit, you should also change its IP
address to that of the original 10.101 unit.
Note
Updating HSU Services
Choosing Update Services from an HSU context menu or clicking
bar opens the Registration window. You may use this to switch the HSU between MIMO and
Diversity mode and change the HSU time slot allocation.

Suspending an HSU

You may break the link (cause a sync loss) to an un-registered HSU for a fixed amount of
time. Here is the scenario:
HSU 10.101 is not registered.
RADWIN 5000 HPMP User Manual Release 3.3.30
Chapter 6
from the HSU button
6-36