Changing the Sector Band
Figure 6-20: Add Bands Instructions Panel
The serial numbers displayed relate to the ODUs in the sector. Click Copy to Clip-
board.
3. This step applies only if you have additional un-installed units:
Before proceeding to step 2 in
If the displayed serial numbers are in the list, select your list and copy it all to the
clipboard. Otherwise append the clipboard contents to your list. Select the whole list
and save it to the clipboard.
4. Now carry out steps 2 to 5 in
which looks something like this:
RADWIN 5000 HPMP User Manual
Figure
6-20, open your own list in a plain text editor.
Figure
6-20. Step 2 will take you to a Web page,
Release 3.3.30
Chapter 6
6-42